HONGDA SPRAYING ELECTROMECHANICAL CO.,LTD


+86 13622624429

  • BACK
  • HDA HOME
  • Navbar
  • 

    HDA HOME >  SERVICE >  installation

    How to replace to bell cup?

    The rotating bell gun is the large flat surfaces with high speed 80000rpm, 80KV voltage, optional bell cup. high voltage charged prarticles are attracted to well grounded workpieces, resulting in excellent surface quality and high coating transfer efficiency.

    aomization centrifugal force ofturbine motor driving form air bearing turbine
    Bell dimension Φ20mm, Φ30mm, Φ50mm, Φ65mm spray width 100-500mm
    Max output voltage DC-20-80KV max output current 300ua
    Max flow rate 500cc/min Max speed 70000rpm/min ( un-load
    Max air consumption 1.0Nm3/min length 600mm reciprocation machine
    Weigh 5.5kgs electrostatic controller HAD-201
    Installation method Fixed, reciprocation machine ro coating robot

    Roatry bell generally has three installation methods: fixed, reciprocation machine, robot, paintfrom the center to the high speed rotating bell head, bell head is charged and 80KV high voltage transmission to the paint, when the paint touches the bell head. is charged with high voltage negativ charge, because thsescharges reple each other, when the paint leaves the bell head, paint particles it's split by the charge into smaller and nore uniform particles until the surface thnsion of the coating is balanced with the charge repulsion


    Previous:Electrostatic spray gun HDA-70 Fan nozzle installation

    Next:How to connect the electrostatic rotary bell to the central control cabinet and how it work?